If your old AC is done and you're ready to switch over, this high efficiency low profile unit with a heat pump is the starting point. Just know it's not backward compatible - you'll need GE's upgrade kit to complete the system.
After a long day outside, the goal is simple: get back to a space that cools down without filling the evening with unwanted noise. You want airflow that does its job without becoming the loudest thing in the campground. This rooftop unit moves air without demanding attention, so conversations stay normal, the TV volume stays where you set it, and sleep doesn't require earplugs. It's the kind of quiet you notice by what you don't have to do.
When a camper has been sitting in the sun, the heat lingers. This unit brings interior temperatures back down so you stop feeling hot and sweaty and can settle back into the space. It helps get things to a point where relaxing inside your camper actually feels relaxing. Once the temperature is set, the system runs consistently without constant checking or adjustments. You're not babysitting controls or wondering if it's doing its job. You're using the space as intended, which matters when you're beat from the day and just wanna melt into your camper furniture.
Some mornings start cooler than expected, especially after a night where temperatures dipped. The built-in heat pump adds light warmth to take the edge off, making it easier to get moving without immediately reaching for a full furnace cycle. It's meant for those in-between mornings when the air feels sharp, but firing up the furnace feels like more than you need.
The low-profile design serves a practical purpose beyond looks. A shorter overall height helps when backing into wooded campsites or pulling into spots where clearance can be tight. It's just one less thing to worry about when you've found that sweet campsite with shade from low branches, or when you're backing your adventure-mobile into storage for the season.
If you're deciding between GE's low-profile options, the difference comes down to how your RV handles power. This high-efficiency model is designed to be more forgiving in busy campgrounds or parks with shared pedestals, where electrical supply can fluctuate.
Both models deliver the same everyday comfort, quiet operation, and low-profile clearance. The HE version simply runs with less electrical strain during longer cooling cycles, which can make a difference if you've dealt with tripped breakers or inconsistent power in the past. If predictable electrical behavior matters to how you camp, this is the version built with that in mind.
When it comes to getting this set up in your camper, this unit is designed around the roof openings used by most RVs. In many cases, that means working with existing cutouts rather than planning changes to your camper. Exact measurements and compatibility details are listed in the specs to help you confirm fit before moving forward. The rooftop unit pairs with a compatible air distribution box, thermostat, and controls, which are sold separately. If you'd rather just purchase a complete kit, check out our selection of Complete AC systems.
For installation help, check out our Installer Locator to find an installer near you.
Note: Thin roofs between 2" and 3" thick may require modifying the AC unit by shortening the installation bolts and trimming the air division baffle.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer. Let's take a quick look at this GE Appliances 13,500 Btu white high-efficiency, low-profile RV air conditioner with heat pump. Now, this low-profile, high-efficiency RV AC is designed to give you an additional three inches of clearance in roof height. And it's also going to give you quiet comfort while you're out on the road. So with 13,500 Btus, this RV air conditioner is gonna be great for your smaller RVs. And the high-efficiency cooling performance is going to maintain consistent air flow and temperature control with reduced energy consumption.
As I mentioned, this does have a built-in heat pump, which is going to keep your coach warm on those chilly mornings. It's going to efficiently use the heat in the air to warm your coach on days as cold as 25 degrees Fahrenheit. And at 35 degrees Fahrenheit, you can extend your propane supply by 19 to 38% by reducing the need to run your furnace. So then when conditions get too cold for the heat pump to work efficiently, it's gonna automatically switch over to your furnace. And this also features on auto defrost cycle to prevent ice from building up on the heat exchanger.
So you're really going to enjoy its ultra quiet operation thanks to the high-performance motor, the dual fan design, and the sound dampening rubber-grommets that are going to work together to minimize vibration throughout your RV. I went ahead and took some measurements before our time together. Looking at the overall length, we are sitting at 40 inches long, the overall width, 30 inches wide. And again, this is a low-profile design. So the overall height from top to bottom, about 11 inches.
This is gonna be a bolt-on design. But this is just going to be for the AC unit only. This is not going to include any hardware. So to complete this setup, you will need an air distribution box, a control box and thermostat. And typically that air distribution box will have that hardware that you need to get this installed.
And you're gonna have to get the air distribution box that's gonna work best with your system, whether that's ducted or ductless. And we do carry complete systems with this air conditioner unit. So if you need the entire setup, whether it's for your ducted or ductless, you can find that complete system here at etrailer, if you need that. But this is gonna be built to last. The UV-coated automotive grade polymer shroud is going to do a great job of resisting fading and cracking. And it's a very durable cover it feels like, so I think it's gonna hold up really well for you. While the corrosion resistant coatings, the heavy duty motor supports, and the reinforced screw holes are going to ensure longterm durability for you. And despite its rugged design, the glossy finish is going to help keep this looking sharp for many years to come. So this weighs about 86 pounds or so. And this is all coming from a name brand that you trust, of course, GE Appliances, which no doubt you know and are familiar with, especially with home appliances. So that same trust and reliability that comes from home appliances is gonna be carried over to your RV air conditioner. If you happen to have any other questions, whether it's about this unit or the systems that we carry, don't hesitate to reach out. We wanna make sure that you're getting exactly what you need. Well again, my name is Andy. Thank you for joining me.
Ratings & Reviews
Do you have a question about this RV Air Conditioner?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.